Boinns Roto Cone Vacuum Dryer is suitable for drying of materials which cannot resist high temperature, material which are easily oxidized, volatatile materials which should be retrieved, materials strong irritant and poisonous in nature. The roto cone dryer with improved technology integrates during operation under vacuum. The roto cone dryer facilitates enhanced drying efficiency, low temperature operation and economy of process by total solvent recovery. It helps cGMP-based working by achieving optimum dust control, while offering advantages of efficient charging and discharging of materials. The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in single cone). The rotary action of the dryer together with mechanical action of the breakers cuts down drying time and gives a lump free product.
- Inner shell/Cone and contact parts in SS 316. Steam/HW water Jacket and Insulation in SS 304
- Cyclone separator in SS 316
- Dry Mechanical Seal for vacuum side
- Digital Temperature Indicators (FLP) at Hot Water inlet and outlet
- Provision for Nitrogen purging/Vacuum release with interlocking to isolation valve
- Gear Box & Motor Direct Coupled
- Extended shaft (drive side) so that drive unit can be kept in service zone (if required)
- Vacuum loading system of wet material into the Cone
- Internal 320 Grit Mirror Polish and Outer 180 Grit Mat Finish
- Reduces drying time Eliminates need for re-drying of lumps
- Handling and exposure of final product is avoided Gives uniformity size dry product
- System can process crystalline or amorphous powders which are prone for lumps
- Optimum and continuous vacuum maintenance during process
- Cantilever (One side base) construction. VFD for Drive Motor with RPM indicator
- Lump breakers with FLP motor, Mechanical seals and electrical slipring joint
- Auto Bin loading mechanism with timer control and Bins. Vacuum pump with FLP motor
- Hot water system (steam heated) with tank and circulation pump
In principle all sizes of our Roto Cone Vacuum Dryer are
| MODEL | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD | BOIN-RCVD |
|---|
| 15 | 100 | 200 | 300 | 500 | 750 | 1000 | 1500 | 2000 | 5000 |
| Total Volume in Ltrs | 15 | 100 | 200 | 300 | 500 | 750 | 1000 | 1500 | 2000 | 5000 |
| Working Volume in Ltrs | 9 | 60 | 120 | 180 | 300 | 450 | 600 | 900 | 1200 | 3000 |
| Capacity in Kg (max) | 5 | 30 | 75 | 100 | 175 | 250 | 350 | 500 | 700 | 1700 |
| RPM | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Heat transfer area in m2 | 0.5 | 3.5 | 4.2 | 5 | 6 | 7 | 8 | 9.5 | 11 | 20 |
| Cyclone Separator in Ltrs | 1 | 5 | 7 | 10 | 15 | 20 | 25 | 30 | 40 | 75 |
| Condenser in m2 | 0.1 | 0.5 | 0.75 | 1 | 1.5 | 2 | 2.5 | 3 | 4 | 6 |
| Receiver in Ltrs | 3 | 20 | 40 | 50 | 75 | 100 | 150 | 200 | 250 | 500 |
| charging Ht in mm | 700 | 1350 | 1500 | 1650 | 1800 | 2000 | 2300 | 2500 | 2650 | 3500 |
| Discharging Ht in mm | 300 | 600 | 650 | 650 | 700 | 650 | 750 | 750 | 750 | 750 |
| Charging lid dia in mm | Φ 150 | Φ 250 | Φ300 | Φ300 | Φ350 | Φ400 | Φ400 | Φ450 | Φ500 | Φ600 |
| Discharge valve dia mm | Φ75 | Φ125 | Φ150 | Φ150 | Φ175 | Φ200 | Φ200 | Φ225 | Φ250 | Φ300 |
| Gear Box | 2” | 2.5” | 3” | 3” | 4” | 4” | 5” | 6” | 6” | 10” |
| Main drive motor | 0.5HP | 2HP | 3HP | 3HP | 5HP | 5HP | 7.5HP | 10HP | 10HP | 20HP |
| Lump Breaker motor | NA | NA | NA | 0.25 HP | 0.25 | 0.5 HP | 0.5 HP | 0.5 HP | 1 HP | 2 HP |
